| |
 |
| Product Facility |
Italy |
| Brand |
GMC |
| Manufacturer |
Gmc Refrigerazione Srl |
| Series |
CV / CV..HD - Basic |
| Costruction |
- CONSTRUCTION SERIES CV1 & CV3 The body and the nipple are made from brass bar UNI EN12164 – CW614N and the solder connections are made of copper tube EN 12735-1 – Cu-DHP.The clapper seat is made of modified PTFE and combines robustness with excellent resistance to high temperatures,the spring that keeps the gate shut is made of austenitic stainless steel AISI 302.The seal between the body and nipple is ensured by a chloroprene O-Ring.
- CONSTRUCTION SERIES CV2 & CV4 The body and the flange are made of hot-forged brass EN12420 – CW617N and the solder connections are made of copper tube EN 12735 – 1 – Cu-DHP.The clapper seat is made of modified PTFE and combines robustness with excellent resistance to high temperatures,the spring that keeps the gate shut is in austenitic stainless steel AISI 302.The seal between body and flange is ensured in some models with an asbestos-free aramid fiber gasket DIN – DVGW approved in accordance with DIN 3535, part 6 FA,in other models with HNBR gasket.
|
| Installation |
- While installing the valve,make sure the arrow direction matches the direction of flow.We recommend installing the valves CV1 and CV3 Series with the vertical axis and the arrow pointing upwards,installations with the inclined or horizontal longitudinal axis are tolerable. The installation of the valves CV2 and CV4 series shall be done with the longitudinal axis lying in a horizontal plane and with the cover facing upward,furthermore only for this series is necessary to dismantle all the removable components from the valve and if the gasket does not remain on the cover,remove it manually from the body.The brazing of the valves with solder connections shall be done with a low melting point alloy.During this process do not point the flame directly towards the body and allow the latter to cool by natural convection in the air.
|
| Note |
- The function of the check valves is to ensure the unidirectional passage of the fluid through the pipes.We recommend using the HD series for installations near the compressor discharge line.
|
