The solenoid valves are considered as “Pressure accessories” as defined in Article 2,paragraph 5,of the PED Directive 2014/68 / EU and are subject of Article 4,paragraph 1,letter (c),of this Directive.The entire range is designed for use with fluids classified by Article 13,paragraph 1,letter (b),of the PED 2014/68 / EU as belonging to Group 2, or non-toxic fluids,non-flammable and non-explosive,this macro Group also includes the refrigerant fluids belonging to Group A1 classification in accordance with standard EN 378-1 and listed in Appendix E of mentioned standard.
The whole range of products includes normally closed valves,that is when energizing the solenoid the valve opens.There are two types of valves,direct-acting and diaphragm pilot operated;in the first type opening and the closing of the orifice, the passage is obtained directly by the plunger.In diaphragm pilot operated,the plunger is only directed to open the pilot hole of the membrane,which closes the orifice and needs a minimum differential pressure,between the inlet and the outlet of the valve,in order to lift up the membrane and allow the passage of the fluid.
 |
|
| Product Facility | Italy |
| Brand | GMC |
| Manufacturer | Gmc Refrigerazione Srl |
| Series | EV - Basic |
Costruction
|
|
Installation
|
|
| WARNING! |
|
